Carbonink Graphic Designer

Gabrielle Package Design

admin — Sat, 11 Feb 2012 18:57:16 +0000

Annual Report

admin — Tue, 13 Dec 2011 15:39:35 +0000

Game Commentary Logo

admin — Wed, 22 Jun 2011 00:22:44 +0000

7 tips to keep in mind when printing promotional material

admin — Sat, 09 Jan 2010 16:13:50 +0000

Image by: gnietsche

Paper Stock:

There are a variety of paper stocks to choose from, with a number of variables with paper weight, paper finish (matte/ gloss…), size and more. This is generally determined by the type of job and your budget. Double sided printing requires slightly heavier paper to prevent colour from showing through, matte paper is generally more expensive than its glossy counterpart.

Bleed:

I would estimate that at least 70% of printed material has colour that runs to the edge of the paper. If your print job falls in this category, you will need to bleed the colour past that edge. For example if you have a business card design that has colour right upto the edge, you will need to increase the size on all sides by 0.125 of an inch- Normal business card size= 3.5″x2.0″, with bleed= 3.75″x2.25″

Layout:

I cannot stress this enough- Use the right tool for the right job, do not use “Microsoft word” to design and lay out your business card design, do not use a spreadsheet program like excel to design a brochure. If you do not have the appropriate software or knowledge to design your business cards / Brochures / Posters etc, I suggest you hire someone to do it for you. Printers generally use standard software’s to set up and print client’s work. Printers set multiple images per sheet, which varies with the size of the sheet to multiples that fit on a sheet. Some digital printers may use a 11″x17″ sheet while others 12″x18″. Bottom line:- Even if you lay out your design multiple times on a sheet, the printer will have to redo it to accommodate for the sheet size he has in stock, this could cost you more or even worse, it could cause you to loose content during the transfer from one software to another.

Appropriate Colour:

Keep in mind what colours you see on your monitor are not necessarily what will print. This is why its always safer to ask your printer for a printed proof, if a job is designed using an RGB colour mode (which is for monitor viewing) you could see a huge difference in colour once printed, this is because most printers use a CMYK colour system. Bottom line: always use CMYK as the colour mode and if possible use a colour from the pantone matching system (pms).

Content is king:

Content on your brochure should always be clean and visible, avoid background images or at least watermark those images. There is no point if you have a great design but your content is not readable.

But don’t get carried away:

Continuing from the previous point, although content is king, do no go over board with it. Keep content brief and to the point, allowing your content to breath is much better than overcrowding it.

Printer knows best:

Want to reduce your cost? Ask your printer what are the alternatives. He may suggest using a different paper stock or printing full colour on one side and black & white on the reverse…

http://www.digitalsquaresprinter.com

Restaurant Menu

admin — Mon, 21 Dec 2009 01:52:55 +0000

Emerald inn

Logo design process

admin — Sun, 13 Dec 2009 01:55:14 +0000

What’s involved in the designing and implementing of a brand identity?

Research:

Every project begins with learning about what you do and how you do it. I need to understand your market, your competitors and your USP (unique selling point). I usually send the client a questionnaire that will help with this phase.

Brand Persona (design brief)

To make sure that both the client and I are on the same page, aiming for the same star, I create a Who, What and Why scenario. This outlines the goals and objectives that need to be accomplished in order to call this project a success.

Inspiration:

After the initial research, I will allow the information to swim around and marinate for awhile. During this phase I will let my mind roam free though fields of images and designs, not necessarily in any one particular field, at times looking into other design fields such as product design, illustration and others, daring inspiration to hit me.

Conceptualizing & Development:

Now we can let our creative minds flex their muscles, brainstorming to come up with ideas and solutions that best fit the brand. This phase includes a session of mind mapping. After which we can put pencil to paper, start preliminary sketches of ideas developed in the previous step. Many of these sketches will end up face down in the trash, while others will be re-sketched and refined.

Once we have some good ideation sketches on paper that I am satisfied with, we can finally shape things up (make it pretty) by transferring these sketches to our computer.

Presenting:

Most of my clients prefer to see a couple concepts, which is presented to them. I do this by uploading the concepts to my site with a private URL, which they can review and comment.

Revising and Feedback:

The next stage is to revise the concept chosen by the client. After completing the changes, I present them to the client in a couple of different formats- Black & white, greyscale, single colour and full colour, each one may need to be used for a certain job.

Once a logo is finalized and full payment has been received, I send the client both vector files and raster image files via email.

Follow-up:

Yes at times I do follow up with clients I worked with in the past and vice-versa. Clients may get in touch for some design consulting or just say hello.

Photoshop Tips

admin — Fri, 04 Dec 2009 21:15:57 +0000

Here are 5 tips that will save you time:

Straighten images: If you have an image that is crooked and needs to be straightened, all you need to do is- go to the “ruler tool” which can be found by clicking and holding on the eye dropper tool. With the ruler tool selected click on 2 points to match the crooked angle. Then go to “Rotate canvas” found under “Image” from the top menu, click on “Arbitrary” and you will see that the angle has already been entered, now click on OK and voila.

Rotate view tool: This tool will rotate the entire canvas, while this is not a tool for creating art itself, it is an essential part of the process. Rotating the canvas allows you to view your art in a different light, which will help notice things that you normally wouldn’t. Its easy to get caught up in the small intricacies while loosing sight of the overall look and feel. This tool will act as a second opinion.

Group layers: Layers is one of photoshop’s greatest features. I personally use plently of layers while working, this helps me go back to a layer and not have to re-create it, but this makes it hard to find and manage layers. Do these two simple tasks every step of the way and it will save you a lot of time and effort. First- name all layers to match what’s on them, Eg. red ribbon (this can be done by double clicking on the layer’s name). Second- group a set of layers that belong to each other. Eg. Ribbons & Bells (This can be done by holding the ctrl key while clicking all the layers you want to group, next press ctrl+g, rename the group and your done)

Pre-plan your output: Begin with your end in mind, Decide how you are going to use the art once completed, will you print it on a business card or on a poster or will you use it on the web. If your going to print it out, you should think about what size and set the resolution to atleast 300 pixels/inch and color mode to “cmyk”. If you plan to use it on the web set the resolution to 72 pixels/inch (to allow your image to load faster)and colour mode to “rgb”.

Save space, by working smart: Photoshop files can at times take up a lot of space on your drive, you can save space by hiding all the layers prior to saving the file. This is especially useful for large files with lots of layers and at times can save you close to 50% the size. (To hide a layer- click on the eye at the left side of the layer.)

These tips should work for most recent photoshop versions.

What I strive for with my logo designs

admin — Fri, 13 Nov 2009 02:22:11 +0000

In no particular order.

A design without unnecessary flare

A logo is NOT an illustration, so lets leave the glowing effects, the drop shadows, the bevel effects, multi colours etc… for illustrations. A logo needs to be simple, to the point but clever.

A design that will outlive me

Although design trends seem to change every year, it is important that a logo stands the test of time. A shiny web 2.0 logo may have been catchy last year, but this year it is considered amateurish. Although I keep an eye on new and old design trends, it is important that my designs work and keep working.

A design that conveys meaning through form

The final mark may be a iconic symbol or a play with text, either way it has to work with the brand.

The Ahhh! factor

Ever been in a situation, where you look at something and realize that there is something more to it and go Ahhh!

Colour follows form

If the mark is not going to work in grayscale, it will not work in colour either. Every initial design that I create is strictly portrayed in black & white. After I am satisfied with it, I will bring it to life with colour (if necessary)

Readability at various sizes

A logo may be used on a shirt or on a business card or at times on a billboard, no matter what size its being shown on it should be readable.

A design that represents the business or the brand

A logo design may be beautiful and mind blowing, but it is pointless unless it suits the particular brand.

Logo Design FAQ

admin — Tue, 10 Nov 2009 20:13:16 +0000

How much will my logo design cost?

Probably the most common question, but unfortunately one that doesn’t have an easy answer. Each logo design has a number of variables; as everyone has a different set of requirements. Some corporations may need several different initial concepts to choose form, while others may just need a couple. It’s like asking a car salesman how much a car will cost, well not exactly but you know what I mean.

Mr. X charges me this much, can you match the price?

I am passionate about what I do and I am not here to compete. I rather work with someone who values my service. If you’re only looking for a guy with a copy of Photoshop and a mouse, I’m not your guy.

What’s involved in the design process?

Please read this article: Logo design process

What is the turnaround time?

Time needed to complete a design project varies anywhere from a week to a month.

What will you provide me with after the project is completed?

I will provide you with native files and eps vector files, which can be used for printing at any scale with no loss in quality. In addition to that I will give you a couple image files, such as jpeg, png etc. with instructions for which format to use when. Along with 1,000 free business cards with a logo design & business card design order ;)

We are not in the same country; can I still work with you for my design?

Yes. With today’s technology the world is our backyard. You will not be the first and definitely not the last.

Do you need any information from me?

Yes. As stated earlier I need to learn about what you do and how you do it. So please don’t place your design order and disappear.

How do you accept payment?

50% of the cost prior to commencing the project is a norm. The balance needs to be paid prior to delivering the final design files. The most convenient method of payment for you is PayPal, especially if you are not next door to me.

Do you pay close attention to current design trends in your designs?

Yes. I do keep a close eye on how design evolves and at times recycles itself. I am constantly on the lookout for what’s new in the graphics world as well as other forms of design, which helps spark creativity that can be adapted to a particular project. But a successful design doesn’t just have to withstand a particular period of time but instead needs to carry your brand for the years ahead.

Will the design you create for me be used in your portfolio?

I reserve the right to include the design I created for you in my portfolio. Although you may not see your design in my portfolio for a couple of reasons- I may not have had the time to do so, I like to change up my portfolio every now and then and there is the off chance that the design may not have been a hit with my personal favourites although it suits your goal.

Need the “who”, to create the “what”

admin — Thu, 05 Nov 2009 22:10:42 +0000

Business owners/ managers need to be involved in the design process.

A design client should always be involved in the design process, in fact a client’s input is what will get the project snow balling. If ever the client is on the sidelines, its either because the designer has the wrong idea about the term “inclusion” or are unaware about this very basic yet vital role.

Brand Value

Without a clients input, we would be creating designs for ourselves or worse still for a fake client. No one knows more about the clients business, their goals, their clientele, target market… than the client themselves. To design a suitable identity for a client, we need to understand who the brand needs to appeal to and what its supposed to convey. Its important to understand the “who” before we create the “what”.

Majority of businesses either new or old, small or large already have a business plan which outlines their audience and their values. This information creates a starting point and a solid foundation to creating a design that will compliment the brand. Brands often fail due to this (key) missing link to building a solid foundation. If a client and the designer are both moving in opposite directions, no amount of design concepts will suit the values of that business.

Cycling Jersey Design

admin — Mon, 02 Nov 2009 01:38:45 +0000

Jersey design for the Brampton cycling club.

Sport Logo

admin — Sun, 01 Nov 2009 23:55:52 +0000

Logo design for a sports related field or event.

Roofing Logo

admin — Sun, 01 Nov 2009 23:47:52 +0000

Carbonink logo

admin — Sun, 01 Nov 2009 23:41:30 +0000

Digital Squares printer- Logo

admin — Sun, 05 Apr 2009 03:03:52 +0000

Digital Squares is a digital printing company.

My inspiration: The letter “D”, the word “squares” from the company name and DPI (dot per inch)- a print/ image related term.

Below is a photograph of the logo made out of blocks and fixed on one of the walls in the interior of Digital Squares.